RESUMO
OBJECTIVE@#To compare the effects of resin base and different retention depth on the fracture resistance of mandibular molars restored with nano-ceramic endocrowns.@*METHODS@#Forty mandibular molars selected and randomly divided into 5 groups: ① The control group which was consisted of intact teeth, ② the non-resin base group, ③ the 2 mm retention depth group, ④ the 3 mm retention depth group, ⑤ the 4 mm retention depth group, respectively. After tooth preparation, in vitro root canal therapy was conducted, which was followed by endocrown design, production and adhesive of groups ②-⑤. All the samples were under load (N) of the universal mechanical testing machine after embedding. The fracture pattern of each sample was observed under stereomicroscope. Then the microstructure of the fracture surface was observed by scanning electron microscopy.@*RESULTS@#The fracture loads of each group were respectively: the control group fracture load was (3 069.34±939.50) N; experimental groups: fracture load of (2 438.04±774.40) N for the group without resin base; fracture load of (3 537.18±763.65) N for the group with 2 mm retention depth. The fracture load of the retention depth 3 mm group was (2 331.55±766.39) N; the fracture load of the retention depth 4 mm group was (2 786.98±709.24) N. There was statistical significance in the effect of resin base and different retention depth on the fracture loads of molars restored with nano-ceramic endocrown (P < 0.05). Repairable fractures in each group were as follows: control group 2/8, non-resin base group 1/8, retention depth of 2 mm group 1/8, retention depth of 3 mm group 2/8, and retention depth of 4 mm group 0/8. The effects of the retention depth and the presence of resin base on the fracture resistance of the resin nano-ceramic endocrowns were statistically significant (P < 0.05). Scanning electron microscopy showed more arrest lines and small twist hackles on the fracture surface of the restorations with resin base (retention depths of 2 mm, 3 mm, and 4 mm), with cracks extending towards the root. In addition to the characteristics above, more transverse cracks parallel to the occlusal surface, pointing outwards from the center of the pulp cavity retention, were also observed on the fracture surface of the non-resin base restorations.@*CONCLUSION@#When molar teeth with nano-ceramic endocrowns are restored, resin base and the retention depth of 2 mm help the teeth to obtain optimal fracture strength.
Assuntos
Cerâmica , Resinas Compostas , Porcelana Dentária , Falha de Restauração Dentária , Análise do Estresse Dentário , Teste de Materiais , Dente MolarRESUMO
<p><b>OBJECTIVE</b>To employ a laser triangulation method for measuring post-gel and post-vitrification polymerization shrinkage of composite resins.</p><p><b>METHODS</b>A novel experimental set-up capable of measuring real-time shrinkage strain was utilized. Total shrinkage of the five composite resins was measured. The measurements of post-gel and post-vitrification linear shrinkage as a function of the gel-point and vitrification transition point were also carried out in the study.</p><p><b>RESULTS</b>Gel point of the five composite resins ranged from 0.77 s to 1.59 s, while vitrification transition point ranged from 1.99 s to 6.33 s. Post-gel shrinkage ranged from 33.35 µm to 53.18 µm and post-vitrification shrinkage ranged from 16.43 µm to 30.58 µm. Total shrinkage ranged from 39.25 µm to 64.84 µm. Significant differences in the gel point and vitrification transition point among the five composite resins were found (P < 0.01). Significant differences in the post-gel shrinkage, post-vitrification shrinkage and total shrinkage among the five composite resins were found (P < 0.01). The ranking of post-gel and post-vitrification shrinkage of these composite was different from that of their total shrinkage.</p><p><b>CONCLUSIONS</b>Laser triangulation method is suitable for measuring clinically significant post-gel and post-vitrification shrinkage.</p>